AMP lady

**** THE AMP LADY WB2YL****

the authorized factory sales and service center

for Emtron

**** Repair service on all tube type amps HF/ Vhf / Uhf ****

** EMTRON amps sales and service **

**HENRY AMPS REFURBISHED **

** cash for dead amps**

Factory direct shipping world wide

EMTRON AMPLIFIERS

GENERAL DESCRIPTION OF EMTRON AMPLIFIERS

4 years parts and labor warranty with 4 years limited warranty on tube as broadcasting.

ALL EMTRON AMPLIFIERS 1KW to 5 KW output HAVE THE SAME FEATURES SUCH AS:

1)

Advanced SWR Protection Circuitry, protects the tube, band switch as well as some electronic circuitry from failure. At SWR greater than 1:2.6 (adjustable) it bypasses the amplifier for 2 seconds as a warning.

2)

Total Overdrive Protection with built-in pre-warning LED and 2 seconds bypass circuit. It is absolutely impossible to generate a broad, distorted spurious or harmonic signal with any Emtron DX Series amplifiers.

3)

Overheat Protection with full temperature monitoring and control, utilizing 2 x Temperature Sensors (80 Degrees Celsius & 110 Degrees Celsius), controlling a 2-speed 72CFM turbine blower.

4)

Instantaneous Visual Display of all important RF, DC and control parameters. No switching required.

5)

2-Step EBS (Electronic Bias Switch) to improve efficiency of the amplifier.

6)

Flash Over Protection to protect the expensive tube as well as the electronic circuitry.

7)

Fault Diagnosis for temperature and plate current surge.

8)

Well Regulated Screen Supply for the +ve and -ve currents as well as current limiting to protect the tube and minimize the IMD.

9)

Soft Start Inrush Protection exclusive to Emtron, is the Phase Control Triac System, as used in Emtron DX Series amplifiers. This unique system found in no other amplifier so far, is the best Soft Start system available today.

10)

Optional QSK Module
(Fast Vacuum Relay) can handle all current digital modes in radio communications.

TO contact :

DX1 / DX2 / DX3 info

DX3http://amplady.com/dx3amp.htm

DX2http://amplady.com/dx2sp.htm

DX1http://amplady.com/dx1b.htm

DX 50 Mhz http://amplady.com/emtron50mhz.htm

EMTRON Price list : http://amplady.com/emtron_2007_price_list.htm paste link on your browser if link does not work

1)	Advanced SWR Protection Circuitry, protects the tube, band switch as well as some electronic circuitry from failure. At SWR greater than 1:2.6 (adjustable) it bypasses the amplifier for 2 seconds as a warning.
2)	Total Overdrive Protection with built-in pre-warning LED and 2 seconds bypass circuit. It is absolutely impossible to generate a broad, distorted spurious or harmonic signal with any Emtron DX Series amplifiers.
3)	Overheat Protection with full temperature monitoring and control, utilizing 2 x Temperature Sensors (80 Degrees Celsius & 110 Degrees Celsius), controlling a 2-speed 72CFM turbine blower.
4)	Instantaneous Visual Display of all important RF, DC and control parameters. No switching required.
5)	2-Step EBS (Electronic Bias Switch) to improve efficiency of the amplifier.
6)	Flash Over Protection to protect the expensive tube as well as the electronic circuitry.
7)	Fault Diagnosis for temperature and plate current surge.
8)	Well Regulated Screen Supply for the +ve and -ve currents as well as current limiting to protect the tube and minimize the IMD.
9)	Soft Start Inrush Protection exclusive to Emtron, is the Phase Control Triac System, as used in Emtron DX Series amplifiers. This unique system found in no other amplifier so far, is the best Soft Start system available today.
10)	Optional QSK Module (Fast Vacuum Relay) can handle all current digital modes in radio communications.